UniFi failing to adopt

1. Disable firewall and antivirus
2. Check that UAP is discovered in the discovery tool and/or the UniFi controller.
3. Failing this, check that UAP has an IP address from the router DHCP list or using Advanced IP scanner: http://www.advanced-ip-scanner.com/
4. Ping the UAP, and if respone received then SSH into the device.
   1. PC use PuTTY (http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
   2. Mac use Terminal command ssh -l (USERNAME) (IP ADDRESS)
5. Username is the controller credentials (default is ubnt and IP address 192.168.1.20)

Commands

ssh -l ubnt 192.168.1.20

1. Accept the certificate
2. Set the inform URL

mca-cli
set-inform https://ip-of-controller:8080/inform

1. Enter the set-inform command multiple times.
2. Adopt the UAP in the UniFi controller.
3. Failing this do a factory reboot and adopt the UAP in the controller

syswrapper.sh restore-default